Parameter of Lockable gas springs
1 Die locking gas spring
In the gas spring ,
the oil and air is isolated , the mainly application is angle or height adjustment for automobile seats and the medical beds etc. This type gas strut has strong locking strength, usually above 2000N.We custom made the gas spring according to your drawing.There are two type die locking,extended direction die locking ,and compressed direction die locking.
2 Elastic locking gas spring
In this type gas spring, the oil and gas are mixed. The adjustive angle is bigger than the oil-gas isolated spring. So the type spring have widely application.The locking strength is about 3 tims as F1 force.(both direction locking,extended direction and compressed direction)
Tell us the extended length and stroke length,we give advice to you.moreover,we can custom made the extending speed,and button length as your requirements..
D1 (Tube Diameter ) |
D2(Cylinder Diameter) |
Extension Force
F1
Min --- Max
| Max Stroke Length |
C |
Frmax |
10mm |
22mm |
30N-1200N |
20mm-40mm |
5mm |
80 |
0.3937" |
0.8661" |
6.61lbs-264.55lbs |
0.7874"-1.5748" |
|
|
10mm |
22mm |
30N-1200N |
20mm-90mm |
5mm |
80 |
0.3937" |
0.8661" |
6.61lbs-264.55lbs |
0.7874"-3.5433" |
|
|
10mm |
26 (28) mm |
30N-1500N |
20mm-40mm |
5mm |
80 |
0.3937" |
1.0236"(1.1024") |
6.61lbs-330.69lbs |
0.7874"-1.5748" |
|
|
10mm |
26 (28) mm |
50N-1500N |
40mm-90mm |
5mm |
120 |
0.3937" |
1.0236"(1.1024") |
11.02lbs-330.69lbs |
1.5748"-3.5433" |
|
|
10mm |
26 (28) mm |
50N-1500N |
90mm-500mm |
5mm |
150 |
0.3937" |
1.0236"(1.1024") |
11.02lbs-330.69lbs |
3.5433"-19.6850" |
|
|
HXLJ01
HXLJ02
HXLJ03
|
